Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

HELP the camshaft won't spin 200

posted by  RoscoTheRam on  Sun Apr 27 14:49 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have 1980 240GL w/ a 4 cylinder It won't start. I thought it was an ignition problem (not getting fire in the hole) then i figured out the timing belt was not turning. The crank pully turns and it has stripped all the teeth off the timing belt. I can not the the cam to spin. Is this a major problem. I have a new belt to put on, but i can't find the marks on the crank and the pulley right above it. Does anyone know where i can get a good diagram of where the marks are, and should the cam spin?
Thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New HELP the camshaft won't spin [200]
posted by  RoscoTheRam  on Sun Apr 27 14:49 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.