Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Euro repeaters installed correctly?? 200

uid 13259's pic
posted by  Sterndogg02 on  Wed Apr 30 13:31 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hey all,
Well I finally got around to installing the amber repeaters AGAIN (had issues before), but was wondering if I installed them correctly. I had problems earlier with fitting them into the slots but here goes: They seem to fit tighter with the higher raised end of the lamp facing towards the front of the car. In other words, the flatter end of the lamp is facing the back end of the car (if that makes sense). If I try it the other way they don't really snap in and are very loose. Basically, I'm not sure which way they fit!!! They are wired to also stay on when my lights are on, and look pretty good.

Thanks, Adam
--
'92 244GL silver-metallic, 141k, Hella 550 Front Fogs, K&N filter w/modded box (no thermostat, and screens), Bilstein HDs w/strut plates, IPD anti-sway bars and upper and lower chassis braces, Volvo 240 OEM rear wing/spoiler, Unitek cam and header sooooon






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Euro repeaters installed correctly?? [200]
posted by  Sterndogg02  on Wed Apr 30 13:31 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.