Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

240 Turbo Vacuum Hose Routing...big oops! 200

posted by  don hodgdon on  Sun May 4 14:08 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Mar 2 07:50 CST 2013
[RELATED]

I thought I had everything labled but it appears I missed one...I had to replace the wiring harness on my '81 242 turbo so I pulled the intake manifold in order to replace all the vacuum hoses, clean the oil breather box and replace all the sensors. I am now in the process of putting everything back together, but it appears that I've forgotten something. The throttle body has two vacuum lines attached to it on the side closest to the head. One of the lines comes up through the intake manifold from the charcoal cannister. Where does the other one come from? As always, any help would be appreciated.



--
don hodgdon '89 744ti, '81 242t, '71 D-35






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 Turbo Vacuum Hose Routing...big oops! [200]
posted by  don hodgdon subscriber  on Sun May 4 14:08 CST 2003 >
  • New EUREKA! [200]
    posted by  don hodgdon subscriber  on Mon May 5 12:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.