Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

replaced all fuses,now I can hear my intank pump humming 200 1986

I just replaced all the old ceramic and plastic fuses with new buss glass fuses.I can now hear my intank pump humming,when I pull the fuse(#5) it stops. Maybe it wasn't working before.I had a leak above the fuse box,and water would drip from fuse to fuse.I McGuivered a "cover" for my fuse box out of a broken door pocket and some marine silicone.I sealed my leaky windshield in the process,so far,so good.
Should I be able to hear the prepump(wagon)? Because I don't hear it on my '87 sedan.
--
philvo






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New replaced all fuses,now I can hear my intank pump humming [200][1986]
posted by  philvo subscriber  on Wed May 7 02:36 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.