Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C Conversion R12 to 134a on 1987 240DL 200

posted by  240Kek on  Mon May 12 13:11 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue May 8 12:21 CST 2007
[RELATED]

Well I just bougth a conversion kit which contains the shrader valves, O-rings, and a bottle of Synthetic poly ester oil. Also purchsed a new receiver dryer.

Any recommendations on the conversion would be appreciated.

This is what I think I have to do.
Disconnect and remove the compressor and drain the old oil. Pour some amount ????? (anyone know how much?) of the synthetic poly ester oil into the compressor and reinstall the hoses.

Replace the receiver dryer with the new one including new O-rings and install the new 134a standard shrader valves.

Have the system evacuated and charged with 134a some amount ???? (anyone know how much of the R134a should be placed in a 1987 240DL?)BTW, there is no R12 left in the system, it was recovered last year.

Have I missed anything?

Thank you for any and all advice.

Jim K.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C Conversion R12 to 134a on 1987 240DL [200]
posted by  240Kek  on Mon May 12 13:11 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.