Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2020 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

More 200 A/C Conversion questions 200 1988

posted by  BRICK BOY on  Tue May 20 16:44 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

This is my very first post, and I must say what a valuable resource!

There has been some recent posts regarding the r132a a/c conversion, so I hope the experienced in this area are still around!

In any case I just purchased the Volvo retrofit kit and already replaced the evaporator core, whew!

I also have a hose that came with the kit, I suspect it is the "high side" or high pressure hose? Is this the one that comes from the compressor (drivers side) around the front of the core radiator support and attaches to the condensor??

There are also two other hoses, one along the passenger fender cowling leading to the firewall and attached to the receiver-drier. Another hose comes from the compressor out over the valve cover and is attached to the evaporator-what are these hoses called?

Sorry for the long-winded post, but I'm really confused at this point which hose I need to replace from the kit.

Thanks!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New More 200 A/C Conversion questions [200][1988]
posted by  BRICK BOY  on Tue May 20 16:44 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.