Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Advice for brake work on 95 940 900 1995

posted by  miracleman49 on  Wed May 21 04:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Apr 6 15:53 CST 2011
[RELATED]

I am going to tackle the brakes on my newly acquired 95 940 94K miles. I have extensive experience with the brakes on my 91 240, but never touched a 940.

Besides new pads, rotors, brake cleaner and syl-glide lub, are there other parts/hardware I should have on hand "just in case"?

For example, are there any pins or grommets for the front that can be replaced, or is all the hardware reusable? FCP Groton says they do not sell hardware for the front brakes on a 940.

Any other tips or advice appreciated.

thanks






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Advice for brake work on 95 940 [900][1995]
posted by  miracleman49 subscriber  on Wed May 21 04:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.