Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2010 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

A/C fill port 900 1993

posted by  Kuba on  Tue Jun 10 07:55 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi,

My R134 A/C was empty when I got the car (the compressor wouldn't even engage), and I got to recharge it. So far I put a small can of PAG R134 via the port next to the shiny can close to the passenger side firewall. Is that the low-pressure port to feed the refrigerant into, or do I need to look for the low-pressure port elsewhere?

As far as I understand those things, the shiny can is the decompression valve, and the access port next to it is on the evaporator side which is hopefully low pressure.

I'm afraid to put any more refrigerant if that port happened to be the high-pressure one -- I don't want the can/hose to blow in my hand. The port has a cap on it saying R134 and a 5Nm or so torqua.

Cheers, Kuba






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New A/C fill port [900][1993]
posted by  Kuba  on Tue Jun 10 07:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.