Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Ball Joint Question #2! 200 1988

posted by  cbremski on  Thu Jun 19 11:36 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I stopped by the Dealer to pick up the '4' strut anchor bolts for doing the ball joints (the ones I need to replace, 8 total) and Borton Volvo doesn't carry them, at least that is what Cleatus sez. He told me to try the hardware store.

Anyone know what size I should look for? Does home depot carry them?

I hate to have to run to the hardware store in the middle of a job. I suspect by looking at them they are 12mm head, but what about thread size. I plan on using loctite as well with them for extra security.

Thanks everyone for all the advice!
Chuck





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Ball Joint Question #2! [200][1988]
posted by  cbremski subscriber  on Thu Jun 19 11:36 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.