Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Making a ram-air type intake... 700

posted by  VOLVOSAABRACER on  Fri Jul 4 08:05 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Okay, So I was looking under the hood this morning.. trying to get some more flow from the airbox. I Was thinking I could disconnect the Warm Air metal tubing from the engine and remount it to the Air Dam as a Cold Air intake. IS there anything wrong with doing this.. or should I just run some other type of tubing? Also, there is a little air flapper at the bottom of the airbox, should I just take off the flapper to keep the air intakes open? Thanks so much!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Making a ram-air type intake... [700]
posted by  VOLVOSAABRACER  on Fri Jul 4 08:05 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.