Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Isspro guage install question 94, 940 turbo 900

posted by  JoeNH on  Sat Jul 5 13:28 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Started to install the boost gauge but have a couple of questions.I disconnected
the stock turbo hose and found the hose size was different than the hose that came with the gauge. What is the best way to connect into this hose and then into the isspro gauge hose.The tee supplied will fit the stock but not the new hose for the gauge.I pulled the light switch out to connect the power, I found the pink wire but not the black ground. I found a white,pink and 3or4 white with a green strip. What other wire besides the pink should I use? Thanks JoeNH






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Isspro guage install question 94, 940 turbo [900]
posted by  JoeNH  on Sat Jul 5 13:28 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.