|
My injectors have over 100k miles on them and I want to send them out to be cleaned, any tips on removing? I read that I should: 1. pull fuel pump fuse, crank engine until it quits; 2. With rags on hand, disconnect fuel lines from rail, intake and return; 3. unbolt and remove rail; 4. disconnect electrical connection on injectors and then carefully remove injectors.
After having them cleaned, I should get new o rings and lube them before replacement. Then reverse above removal and see if my brick will start. Am I missing anything? As always, I appreciate everyones input.
Rob Mac
1989 740 GL, Bosch fuel system
|