Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

IPD Bushing Kit or FCP Groton? or someone else? 200

posted by  North Shore Brick on  Thu Jul 10 12:45 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Thanks to some good advice from the Board members, I am going to replace all the bushings in the rear end of my Volvo. The question is now where is the best place to by them?

I live in Canada, so not much in the way of choices up here, (if any), so I am looking at IPD or FCP.

IPD are significantly more expensive:
Normal Rear Kit = 140.20us
Poly Rear Kit = 158.60us (I would prefer the stiffer Poly)

FCP:
Normal Rear Kit = 70.00us
Urethane supports and rest of Kit = 90.00us

Anyone have any thoughts as to why the difference and what I should consider?

Cheers
-Phil






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New IPD Bushing Kit or FCP Groton? or someone else? [200]
posted by  North Shore Brick subscriber  on Thu Jul 10 12:45 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.