Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Brake Pressure Bleeder? 200

posted by  Trev29 on  Sat Jul 12 01:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

There have been many posts about bleeding brakes and the dangers involved with pumping the brakes and ruining the seals in the master cylinder.

Myself, I've used vacuum to suck the fluid through the system but the setup's a bit elaborate. I've seen a post about using a bike pump and adapter on the master cyl cap to force fluid through the system but that would require disconnecting the setup to refill the master cyl.

Anyhow, I was wondering if anyone has tried using a pump sprayer like that used on fruit trees and coating decks. Ie. remove the wand, slip the hose over an adaptor (like in the bike pump setup), fill the container with brake fluid, pump a bit a pressure, and go around bleeding the brakes.

Would this work or are there inherent problems?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Brake Pressure Bleeder? [200]
posted by  Trev29  on Sat Jul 12 01:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.