Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2016 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Overheating Still 200 1980

posted by  someone claiming to be Mike on  Thu Jul 17 08:21 CST 2003 [RELATED]

The other day, I posted a problem with my brick nearly overheating, as evidenced by the temperature gauge rising just below the red line. I found a problem with the fan clutch, thanks to a very helpful posting. The fan can spin freely when the engine is off. Now I'm having trouble removing the fan clutch to replace it. There's a 17 mm bolt that holds the fan and clutch to the water pump. I can't remove it. There are also 4 10 mm bolts behind the fan clutch but in front of the water pump that my sockets cannot reach to loosen.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Overheating Still [200][1980]
posted by  someone claiming to be Mike  on Thu Jul 17 08:21 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.