Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

I by-passed my TCB and now the clock won't work?? 200 1991

posted by  allen820 on  Sun Jul 20 12:06 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I just installed a jumper to disable my Temp Comp Board. (Of course, I removed the board completely). All went well, and now my temperature guage works great, and so does everything else -- except the clock. I took everything back apart to see what I had forgot, but I cannot find a problem. There is an extra red and white wire back there that is not connected to anything, but I cannot find a spot for it, and I didn't disconnect it in the first place. I assume that is an extra wire for some guage not found on my "DL." From the looks of the wiring, it appears the clock gets its juice from one of the three wires in the clear plastic "pigtail" just behind the speedometer. Is this correct? Maybe, I need to take it all apart AGAIN and look for some corrosion somewhere. Anyone got any better idea?? Thnaks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New I by-passed my TCB and now the clock won't work?? [200][1991]
posted by  allen820  on Sun Jul 20 12:06 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.