Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Aftermarket Parts for Center Support Bearing 700

posted by  Dunwood on  Mon Jul 21 12:41 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The center support bearing housing (driveshaft) seems to have some slop in it. I can move it up and around with not much effort. Plus it hummmms during certain RPM's. The factory Volvo support (not the bearing) looks like its close to $130 vs. the aftermarket part which is closer to $38.

After my last experience with the aftermarket strut mount bearings, I'll FIRST ask whether anyone has used aftermarket parts for this application or should I suck it up and buy the factory part?

I'm confident I can buy the bearing part aftermarket, put the rubber piece is questionable.

Any experience with the aftermarket U-joints as long as I'm in there?

Thank you in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Aftermarket Parts for Center Support Bearing [700]
posted by  Dunwood  on Mon Jul 21 12:41 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.