Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/1999 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I check for internally collapsing brake lines? 200 1992

posted by  AlanK on  Sat Jul 26 18:07 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jan 16 08:03 CST 2014
[RELATED]

I have started to check out my front brake dragging problem - both sides and quite severe.
On the right side the pads are worn evenly and the pistons move freely but the pins are quite corroded and one was slightly bent (by about 1- 2mm in the center). How can I check the brake line for internal swelling/collapsing? From the outside it looks and feels fine. BTW are the shims important? Whoever serviced the brakes previously did not replace them.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How do I check for internally collapsing brake lines? [200][1992]
posted by  AlanK  on Sat Jul 26 18:07 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.