Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2011 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Angle tightening tool?? 900 1994

posted by  Murph on  Fri Aug 22 17:10 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Dec 15 17:17 CST 2000
[RELATED]

I got all my parts to rebuild the front end of our 94 940 today (FCPGroton)

Looking thru the FAQ I see that the ball joint to strut tube bolts should be torqued to 22 ft-lb then angle tighten 90 degrees. I don't own an angle gauge. Can I, after torqueing to 22 ft-lbs. then "eyeball" the bolt an additional 90 degrees (1/4 turn)? Thanks.
--
Murph






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Angle tightening tool?? [900][1994]
posted by  Murph subscriber  on Fri Aug 22 17:10 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.