Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Strut Rod 900 1993

posted by  someone claiming to be Bob W. on  Tue Sep 2 04:36 CST 2003 [RELATED]

Anybody know a salvage yard to get one? I'm in the Philly area. I replaced the control arm stay bushings, much easier than trying to get the stinking rotor off, and one rod was was in very good shape and the other was rust welded (bushing metal sleeves to rod). I chipped and hacksawed the best I could to get the old sleeves off and put the new bushings on but there is still alot of rust. Also, is the rear washer welded to the rod? The kit I got came with a rear washer but after picking through the undercoating, it doesn't appear that the old one would want to come off easily.

Thanks,
Bob W.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Strut Rod [900][1993]
posted by  someone claiming to be Bob W.  on Tue Sep 2 04:36 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.