Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Rear wheel well mod (Anti rust) 200

posted by  Mac_Muz on  Thu Sep 4 04:08 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon May 30 19:26 CST 2011
[RELATED]

On page 3 in Volvo Repair, I have taken steps to kill more rust, using the front fender liners from a bone yard special.. The plastics are trimed down to fit and bent with a knee some to do so.. About 5 self drilling screws were used to mount these.. After fitting I use ATF and roofing cement on the wheel well before mounting these and after sealed the edges.

http://photos.yahoo.com/bc/mac_muz15

Some screws need to be trimmed off on the inside before I re-install the wheel well inner covers..

3 pics show what was trimmed off leaning on what was used... Taking black on black pics is not so easy I find, so if anyone wants to ask, just blaze away....

Also I am seeking the trim plastic for the front bumper. I don't know what it is called...

It is or was I should say glued to the metal "L" shape on the drivers side. I have the metal piece, and only need a servicable cover (All Black) for a 1985 (old style) anyone got one of these? The donnor car for the liners was a 87' and it had a chrome high lite on this "L" and I want all black.....
Mac






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.