Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2007 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Removing lower rear shock bolts... 700

posted by  Choices on  Mon Sep 8 21:23 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 16 10:32 CST 2013
[RELATED]

Simple job for the weekend, or so I thought. I intended to install a set of Boge ProGas rear shocks and a 25mm IPD rear sway bar on my 90 744T. Everything came apart easily except BOTH lower shock bolts. No amount of WD40, PbBlaster made a difference. The nuts came off, but the bolts seems corroded to the shaft, which eventually ripped loose from the rubber in the shock, but still wouldn't turn freely, and wouldn't pull out. I tried heat (MAPP torch) but no luck. Any suggestions before local shop charges me $100 to do something mysterious but effective?

Jim Weiss
83 245T, 90 744T/M46, 90 760T, 93 945T, want more . . .






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Removing lower rear shock bolts... [700]
posted by  Choices  on Mon Sep 8 21:23 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.