Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2003 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ABS, no error code set but light is still on? 900

posted by  wearearewe on  Sat Sep 13 12:12 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hi all,

I'm new here and have a question regarding the ABS.

We just picked up a 91 940se in fairly descent shape knowing we had an issue with the ABS system. Thanks to the FAQ here on BrickBoard I was able to retrieve the ABS disgnostic code. The code was 2-3-2, Right front wheel sensor: signal missing. So I took apart the right front wheel, cleaned the sensor, and cleaned-up the tone ring. The sensor tested out good (according to the FAQ specs) so I put it all back together and reset the diagnostic code and went for a spin. The light is still on but now I get a diagnostic code of 1-1-1, No error code set. The ABS seems to work correctly but like I said the light is still on.

Any ideas would be appreciated.

- Jeff






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New ABS, no error code set but light is still on? [900]
posted by  wearearewe  on Sat Sep 13 12:12 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.