Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lots of things replaced, but the idle's still at 2000rpm. What to do next? 200 1987

posted by  someone claiming to be kraynek, still stranded on  Sun Sep 14 14:57 CST 2003 [RELATED]

Well, I replaced the ECT sender today, and nothing has changed fro the 2000 rpm idle. (As long as the new sender works . . .i still need to test it just to be sure.) I've replaced the ECT and throttle switch. I cleaned the throttle body and IAC valve, and checked for vaccuum leaks. I can't think of anything else that would be causing this high idle.

Two questions:

1) What is the process for setting the base idle? I remember something about shorting the connections on a blue connector behind the battery and then doing something else. Anyone know the procedure? This is one of my "last hope" plans. It will make me feel STUPID if it works, but hey, at least the car will be fixed.

2) Any other ideas on what might be wrong with the car?

Thanks
Mike






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lots of things replaced, but the idle's still at 2000rpm. What to do next? [200][1987]
posted by  someone claiming to be kraynek, still stranded  on Sun Sep 14 14:57 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.