Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing Belt/water pump/ camshaft seals changeout on the Swedish Meatball 200

posted by  someone claiming to be UNCJD2003 on  Sat Sep 20 05:05 CST 2003 [RELATED]



Hey, folks. My 1992 240, "The Swedish Meatball," needs a timing belt. While that's being done, I was going to change out the water pump also, since it has about 113,000 miles since the first one was replaced (the whole car is at 190,500). I just graduated from law school and haven't been able to find a job yet--hard to believe in this wonderful, booming economy. What this means is, I have almost no money, so I was thinking about trying this job myself.
I looked in my manual and it has all sorts of cautions about doing timing belts on a B230F motor because of the interference design. I'm writing to ask if anyone has any advice on doing this job, and if I shouldn't do it myself, what is a good price for the work. I've done things on my previous cars such as struts, shocks, accessory belts, and CV joints, but never anything this advanced.
Thank you!

-Rob Jennings
rnjennings2003@yahoo.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Timing Belt/water pump/ camshaft seals changeout on the Swedish Meatball [200]
posted by  someone claiming to be UNCJD2003  on Sat Sep 20 05:05 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.