Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

connections to the Air Mass Meter 200 1986

posted by  mmaldin on  Mon Sep 22 10:40 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jul 22 13:06 CST 2014
[RELATED]

I have been having problems for many years with the electrical connections to my AMM. Early in my 240's life, the AMM was replaced under warranty. A couple of years later, when it exhibited the same symptoms(limp home, this time no warranty), an astute mechanic cleaned and tightened the AMM connections and the hesitation and not moving beyond a limp problem was solved. Over the years, the AMM has exhibited the same problems that have always been solved by cleaning and tightening the connection. (Based on my experiences, I suspect that many AMM's are replaced when it is actually a connection problem). Well, this problem is re-occurring more often and I believe that it is time to replace the connector to the AMM with a new one. Does anyone know how to obtain new parts to do this? I obviously do not want to buy an entire wiring harness. Thanks, Michael
--
1986 240, 230K, Original owner, Boulder, CO.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New connections to the Air Mass Meter [200][1986]
posted by  mmaldin subscriber  on Mon Sep 22 10:40 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.