Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Hey BC i did it (flame trap relocation).....and follow up to 'popping in left wheel' 200 1985

I took the extra flame trap "cup" and took the razor to it. I sliced the larger part of the cup off and inserted a (approx.) 3" piece of 1/2"(?)brass pipe in to the end of the newly sliced "cup" (only 1/2 way in). I then took the other intacked flame trap "cup" and fully inserted the pipe onto it. I mounted the sliced half onto the oil box and wowwie whata a improvement! I then to my flame trap (with the center popped out) and placed it in to the new, and improved, extended flame trap holder. I had to remove the flame trap a couple more time in order to make the new vac hose sizes, but it was very simple due to the new location. The flame trap now sits in between the intake rails 2 & 3.
Very easy todo took all of 20 minutes(including the time to locate my missing hacksaw)Cost $0. Thanks for the tips BC it worked nicely. Hmmm now i wonder if i should atetempt to remove the brown dash in my parts 87 245 and paint it for my 85 245........

Oh to all who responded to my "popping in left front post" Thanks.It turns out it was loose lug nuts! go figure.
--
Dan D. '85 245 DL , '93 945 .Delanisdjd@aol.com






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Hey BC i did it (flame trap relocation).....and follow up to 'popping in left wheel' [200][1985]
posted by  Dan D.  on Mon Sep 29 11:13 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.