Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Sunrooh headliner sunroof and adhesive 700

posted by  ictus on  Tue Oct 14 04:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Ain't doing the headliner a ball!

Two issues:

1)I find even the 1/8" foam backed material too thick for the sunroof. What I see Volvo did is they used foam backed material on the main board and unlined (thinner) material on the sunroof. Any ideas on how to make the 1/8" material work on the sunroof?

2) How do you remove the adhesive used to hold the headliner on the sunroof? I found the adhesive not strong enough to hold the new material (even after reactivation with solvent)and would prefer to remove it. I cannot find a solvent which works at all well. Any idea?

Thanks for replies






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Sunrooh headliner sunroof and adhesive [700]
posted by  ictus  on Tue Oct 14 04:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.