Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2019 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Need advice on bending brake lines 900 1991

uid 10125's pic
posted by  jar240 on  Thu Oct 16 09:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Dec 20 18:55 CST 2008
[RELATED]

Whilst changing over to stainless brake hoses on my ABS-equipped 945T, I snapped the little threaded 11mm nipple that holds the line in the hose. It's still sealed fine, but would like to finish the job. I have the brake line from the dealer (about $36 US), but it comes in a 1' diameter coil. I've never bent brake lines before. Do you think I should try myself, and if so, what kind of tools do I need to do the job?

Thanks,
Chris
--
1991 Volvo 945T @ 304K kms, in Ottawa, ON, CANADA






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Need advice on bending brake lines [900][1991]
posted by  jar240  on Thu Oct 16 09:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.