Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

'78 262C Steering Box Seal and Fuel Sender Questions 200 1978

posted by  Chief Rider on  Mon Oct 20 04:55 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I traced a power steering fluid leak to the top of the steering box. Is there a seal or gasket that a mortal can replace to stop the leak? Chilton's mentioned shims and intricate measurements when working on the steering box. I just want to stop the leak.

Also, I'm replacing the sending unit in the tank due to it being very rusty (sitting in half a tank of gas for seven years). What is the secret handshake on dealing with the return hose on the sender? It's a plastic hose on a barb fitting encased in a rubber hose. If I cut it off, what's the best way to get it reattached to the new unit?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New '78 262C Steering Box Seal and Fuel Sender Questions [200][1978]
posted by  Chief Rider  on Mon Oct 20 04:55 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.