Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Control Pressure Regulator question 200 1980

posted by  MartyNJ on  Thu Oct 30 07:03 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 21 19:49 CST 2010
[RELATED]

242 DL B21F non turbo engine. The Haynes manual says the resistance should be between 20 and 30 ohms. I'm showing 18 - 19 ohms. I s this a problem.

Also should the resistance be different when it is warm from when it is cold? Mine is not at all different.

I'm having a cold start problem as well as missing and sputtering during acceleration.

Oh and the cold start injector shows 4 ohms but the book says 10???

Thanks, Marty
--
84 245 DL, 80 242 DL, 66 Pontiac Catalina + many other wheeled devices.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Control Pressure Regulator question [200][1980]
posted by  MartyNJ  on Thu Oct 30 07:03 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.