Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Worn clutch pedal to master cylinder pivot? 700 1988

posted by  Erwin on  Sat Nov 1 23:54 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 10:39 CST 2014
[RELATED]

I've covered all the other bases, even bought IPD's pressure bleeder and there is no air and are no leaks in my clutch hydraulics. It looks like I'm losing a bit of travel at the clutch pedal connection point to it's master cylinder. There is a good half inch of slop in the pedal that I'm thinking would give me enough travel at the release arm to fully disengage the clutch.

Anyone ever experience this? Short of a new pedal (don't know the cost yet) I'm thinking of removing the pedal, drilling out the worn holes,making up two metal bushings to fit in their place and see what happens.

The system holds pressure, I'm not losing fluid and while this wasn't a problem before replacing the clutch & PP, I suspect the added thickness of the new parts requires full travel I'm not getting.

Looking for anyone who's been down this road. Roylak tells me he replaced his pedal with an older metal unit. When did they go plastic?

Help. I really miss this car and am tired of driving my 855t.
Thanks,
--
Erwin in Memphis, '88 745t 190,000 miles, '95 855t 92,000 miles






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Worn clutch pedal to master cylinder pivot? [700][1988]
posted by  Erwin  on Sat Nov 1 23:54 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.