Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2009 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

How do I completely remove the Parking brake Shoes? 200 1980

uid 15053's pic
posted by  Dylan Berichon on  Sun Nov 2 14:56 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Oct 23 17:22 CST 2014
[RELATED]

I'm changing the rotors on my '80 245DL, and I've run into a bit of a problem.

I got one side done with no problem, but now, I'm on the other side of the car. The rotor would not come off. I had already loosened the parking brake adjustor pretty far, and it had no effect.

I finally just used a hammer and got the rotor off, but I caused another problem.

One of the shoes for the parking brake came completely off. It bent up the springs and it's not going to go back on properly.

I got both shoes off, but there's this wierd brass piece on the bottom of the thing that's pretty loose now. I can't figure out how to remove it. Is it attached to the cable perhaps?

Now, is there anyway I can safely just completely remove the parking brake shoes from that side of the car until I can get replacement parts? I would just leave everything as is until I can go to the dealer/Ipd, but I'm going to need to drive the car tomorrow. What do I need to do to remove the whole thing?

Thanks, as always.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New How do I completely remove the Parking brake Shoes? [200][1980]
posted by  Dylan Berichon  on Sun Nov 2 14:56 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.