Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2012 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Will a 960 Rear Sway bar fit a 760? 700 1990

posted by  Choices on  Sun Nov 9 03:36 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Aug 16 10:32 CST 2013
[RELATED]

I think the subject line says it all. I have a rear sway bar from a 92 or 93 960 with what seems like all the hardware. etc. I already have a 25mm front bar on the 760, and the 960 rear bar is, I think, 18mm. I know IPD offered a kit for the 760s w/IRS until a few years ago, but, no longer. There are what appear to be plastic/rubber "knock outs" on the lower links that would seem to be the attachments, but if anyone has experience or info, I'd like to be prepared before I do some expensive damage. Thanks.

Jim Weiss
83 245T, 90 760T, 90 744T/M46, 93 945T, want more . . .







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.