Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2006 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Noisy blower motor - 3 or 5 screw? 700 1991

posted by  darius on  Wed Nov 19 15:00 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Sep 20 19:24 CST 2014
[RELATED]

I have to replace my blower motor on my 1991 745T because it is very noisy now that the weather has gotten cold. I purchased a new one from FCP Groton and from what I can see, my motor has three mounting screws (same as the new motor), not five. I also need to know if my motor has two wires or three - I guess I can find out when I pull it apart again, but it would help to know in advance. I see the FAQ's only refer to removing five screws, but I have a feeling that refers to earlier cars. Thanks for the help.
--
Darius in Albany NY '86 744 GLE (174K); '91 745 Turbo (164K)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Noisy blower motor - 3 or 5 screw? [700][1991]
posted by  darius subscriber  on Wed Nov 19 15:00 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.