Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

944T RIDE HEIGHT 900 1994

posted by  dakinecar on  Thu Nov 27 18:19 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

159Kmis on this car. Just replaced rear springs w/Scan Tech springs from FCBG. Before replacement ride height was uneven at all four corners; now height (as measured at the jack lifting point bars) is 6 5/8" both front and rear on the driver's side and 7 1/16" at both on the passenger side (~1/2" difference). Front wheel camber is still OOS on both wheels. Should I replace the front springs next to try and even up the ride height so I can then get the alignment in spec? I understand that front springs rarely sag; but if not the springs, what next?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 944T RIDE HEIGHT [900][1994]
posted by  dakinecar  on Thu Nov 27 18:19 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.