Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2013 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Pushrods for B20 with Chevy solid lifters and Street TorqueCam 120-130

uid 4464's pic
posted by  brettsutherland on  Thu Dec 4 05:07 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 22 13:00 CST 2011
[RELATED]

The Xmas kitty has been let out ofthe bag and I know that I am receiving a Street Torque Cam to install in my B20E when I do the rebuild in the Spring ... it is coming without the lifter and pushrod kit. I know that the lifters of preference are Chevy Small Block solid lifters and that the pushrods needed are 8 3/4" in length. However, unlike stock chevy pushrods, they need to have a cup on the rocker cover end unlike the round end on the chevy pushrods. I know I can get the whole set from IPD @ US$8.00 each for the pushrods. I think I can probably source the parts locally cheaper than here in Nova Scotia than bringing them in from the US .... What I need to know is what the source of the longer pushrods is.... are they Volvo in origin or are they special manufacture ?

Thanks for the help guys !!

--
Brett Sutherland & the 1.5 million mile 122 Canadian Old VOLVOS never die ....... They just become 'COOL'!!!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pushrods for B20 with Chevy solid lifters and Street TorqueCam [120-130]
posted by  brettsutherland subscriber  on Thu Dec 4 05:07 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.