Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

940 Girling caliper guide pin grease 900 1991

uid 6185's pic
posted by  blue940 on  Sat Dec 6 10:28 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Oct 18 21:11 CST 2014
[RELATED]

I plan on dismantling and regreasing the guide pins on the Girling front calipers of my 940. I read in the FAQ that one should use a high temp silicon base grease. I have a tube of molybdenum disulphide based grease (Castrol) in the shed. Is that suitable for use on the guide pins? The tube says it is a high melting point, extreme pressure grease suitable for using on ball joints and tie rod ends so I assume it will not damage rubber. The grease is black. The grease that came with the calipers when I bought them was black but I guess that doesn't mean it's the same stuff.
Any thoughts always appreciated.


Regards
Brad






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940 Girling caliper guide pin grease [900][1991]
posted by  blue940  on Sat Dec 6 10:28 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.