Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cooling fan addition 900 1994

posted by  Park on  Fri Dec 12 11:59 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Apr 22 07:46 CST 2014
[RELATED]

I'm adding a trans cooler and pusher fan mounted in front of my evaporator, the fan has it's own starting relay. I desire the fan to come on as soon as the engin runs, and off when the engin is off, without referenace to coolent temp or AC status. All I need to know is what wire/circut can I tap into to energize the run relay to accomplish this? The curent amount I need for this is extreamly low, I will safely fuse relay coil power and fan motor supply power. I just want the safest/easiest tap?

TIA "Park"






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cooling fan addition [900][1994]
posted by  Park  on Fri Dec 12 11:59 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.