Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 headlight relay connector melted 200

posted by  Garyh on  Sat Dec 13 10:29 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Apr 15 11:44 CST 2012
[RELATED]

I worked on my son's 1989 240 a couple of weeks ago finding brake light problem due to bulb failure relay (re-soldered and worked). Last night headlights went out and found melted headlight relay connected melted at the + main supply. Thinking this is what caused the bulb failure relay to fail, since before that he smelled burning.

First, thanks to brickboard FAQ; diagnosed bulb failure relay first time and going for the headlight relay this time.

Two questions

Connector obviously heat from short or bad connection. Any ideas where to check for root cause?

What is best fix without removing entire harness (I know that is the best way)? Is splicing a new connect a good idea?

Thanks

Gary






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 headlight relay connector melted [200]
posted by  Garyh subscriber  on Sat Dec 13 10:29 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.