Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front positive camber issues 200 1987

posted by  zcar4me on  Sat Dec 13 16:46 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I'm getting a lot of outside tire wear on my '87 240. I've replaced the ball-joints at both ends, and have the shock towers turned in all the way (towards the motor), yet I still have positive camber on each side. I'm not sure what else it could be. I would think if the upper strut mounts were worn it would only cause negative camber. The lower control arm bushings look fine as well. What else can I do, other than buying lowering springs?
Thanks.
Jack H






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front positive camber issues [200][1987]
posted by  zcar4me  on Sat Dec 13 16:46 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.