Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 8/2004 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Replaced exhaust manifold gaskets. 900

posted by  anarchyx34 on  Mon Dec 15 16:25 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Feb 21 03:14 CST 2008
[RELATED]

Today I gave in and replaced the exhaust manifold gaskets with the help of a friend (#1 blew out). It went pretty much without a hitch, although it still was a mild PITA. All the manifold nuts came off nice and easy (I've been hosing them with PB blaster occasionally for weeks). I took one look at that oil cooler that everyone says you have to remove and said "no way!". I removed the one nut underneath the manifold, then removed the wastegate actuator/rod, then the oil feed and return pipes & exhaust downpipe. Then it was able to move enough to change the gaskets. Took us about 3 hours. Unfortunately I discovered that my turbo has a bit of lateral play in the shaft, so I'll be needing to deal with that soon. But the job wasnt the nightmare the FAQ made it out to be. The car is sooo nice and quiet now and the turbo is soo much more responsive.
--
'93 945 turbo. A big comfy box.... and a '90 Mazda 626 GT turbo, 16psi on upgraded turbo and a bunch of other mods.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Replaced exhaust manifold gaskets. [900]
posted by  anarchyx34  on Mon Dec 15 16:25 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.