Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

STRESS! can someone tell me where ONE high beam wire is for wiring in driving lights? 200

posted by  unggthat on  Wed Dec 17 10:21 CST 2003
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Mar 6 10:37 CST 2014
[RELATED]

So I figured(obviously wrong) that the brown wire going to the turnsignal stalk is the high beam wire. It's not. it's continual power. I need to wire in my driving lights (don't worry, I have a relay and fuse) so that they come on and off with the high beams with a switch to kill the driving lights. All I need is ONE dumb wire that only has power when the high beams are on, preferrable that's inside the car. I've been following the Bentley wiring diagrams to no avail. I know someone must know this or have some manual that says. I'm frustrated, and now it just got dark and my dash is all apart....I was so close to done too. welp, thanks!
Nate Gundy
--
'86 240DL sedan, 260K miles, M46, K cam, 25/21mm sways, 260 front springs, wagon rear springs...working on my valve spring compressor website...






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New STRESS! can someone tell me where ONE high beam wire is for wiring in driving lights? [200]
posted by  unggthat  on Wed Dec 17 10:21 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.