Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

hex screw driver for sunroof adj? 900

I removed the headliner of the '89 740 sunroof to adjust the sag in the back. I saw the screw that needed the adjustment however its was hex shaped screw. I first thought it required an allen wrench but both sets(inch and metric) didn't fit. Was this a stock assembly or am i looking at a sunroof w/ replaced screws. I'm assuming that i'll need to pick up a hex driver set now.
Am i on the right track?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New hex screw driver for sunroof adj? [900]
posted by  eric c  on Thu Jan 15 08:39 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.