Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Do M47s and M46s use the same crossmemeber? 200

posted by  Jessie on  Wed Jan 21 03:25 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Jan 18 17:45 CST 2011
[RELATED]

I have already done the conversion, but I am getting some vibration. I know the mount is different but I am not sure about the crossmember. The old M47 one fit, but I am wondering if the clearance is too tight. Also do M46 gearboxes normally have spacer washers between it and the frame? The original m47 did not.
I'm not having much luck with gearboxes these days. I have 2 240s and 2 m46s with bad actuator seals, an m47 with a bad input bearing, and an aw70 I can't give away.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Do M47s and M46s use the same crossmemeber? [200]
posted by  Jessie  on Wed Jan 21 03:25 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.