Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2004 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Disconnecting and repairing Turbo inlet hose 700 1991

posted by  Allanwayne on  Thu Jan 22 02:47 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 8 15:05 CST 2012
[RELATED]

This is the large S shaped hose from the AMM to Turbo with a narrow wire bundle branching off to the engine.

I was unable to disconnect the narrow hose from the main inlet hose and didn't want to force it. Is there a trick to this or just a twist and hard pull?

Also, anyone had success patching a small crack (1/4"). Duct tape wouldn't stick at all, I am assuming it was because of the cold. I even scrubbed off the oily film with soap and water first - still no sticking.

Thanks.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Disconnecting and repairing Turbo inlet hose [700][1991]
posted by  Allanwayne  on Thu Jan 22 02:47 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.