Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

loose turbo 84 245 200

posted by  someone claiming to be 1bike001 on  Mon Feb 2 07:31 CST 2004 [RELATED]

Hi all. A few weeks ago I purchased a 84 245 Ti. It needs a little bit of this and that but yesterday I discovered the "donut gasket" noise, (according to the previous owner), I heard when buying it is actually all 4 of the mount bolts are loose. I don't know how it still runs. There ia about a 1/4" gap between turbo and manifold. I've put about 2500 miles on it that way. Anyway my questions are:
1 What is the bolt size that holds the turbo on

2 Is there anything other than manifold gaskets that i need to have on hand

3 Is the job pretty straight forward? It looks to me like disconnect exhaust. Disconnect water lines and intercooler and unbolt manifold. Am I close?

Thanks

Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New loose turbo 84 245 [200]
posted by  someone claiming to be 1bike001  on Mon Feb 2 07:31 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.