Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

No start after replacing timing belt and front oil seals 200 1985

posted by  someone claiming to be Miike on  Wed Feb 18 19:00 CST 2004 [RELATED]

I have a B230F engine. I got the crankshaft seal on totally flush and put silicone sealant over the cracked seal housing. I reassembled the timing belt stuff, reconnected the air mass mater (originally to access the AC pump), checked everything else. Now the car won't start. The starter is trying and sounds strong. The battery is 12.6 Volts. Fan/alternator belt tension is normal. Crankshaft and distributor are moving. Fuses are fine. Why won't the car start?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New No start after replacing timing belt and front oil seals [200][1985]
posted by  someone claiming to be Miike  on Wed Feb 18 19:00 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.