Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Seat heater element questions 200 1986

posted by  B.C. on  Fri Feb 20 15:43 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Mar 28 22:28 CST 2012
[RELATED]

Hello to all -

In the midst of stripping out parts from my crusher-bound 1979 245DL, I discovered that the driver's seat has a seat heater in it. Sometime ago I must have installed a boneyard seat, since there is no wiring for the heater in the 245DL.

Question: Are the heater elements in the crusher-bound 1979 245DL worth removing and keeping for potential use in one of my other 240s? I have three GL models, all with seat heaters. Some work, some don't.

If a heater element is not working, can it be repaired? I remember reading that a solder-able connection at the thermostat breaks and might be reparable.

I really am in the midst of the stripping work, so I didn't look in the FAQs.

An answer will be greatly appreciated.

BTW I have both Haynes and Bentley explanations on how to remove the elememts, but if you have BTDT, any nifty tips will be very welcome.

Regards, and thanks in advance,

Bob

:>)






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Seat heater element questions [200][1986]
posted by  B.C. subscriber  on Fri Feb 20 15:43 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.