Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Front Brake Problem...and a WARNING!! 700 1989

posted by  raidman on  Mon Mar 1 15:30 CST 2004
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Apr 4 22:17 CST 2014
[RELATED]

About 6 months ago, I replaced the front Girling Non-ABS calipers with rebuilt ones (and even painted them RED), new Zimmerman rotors, new PBR brake pads and ATE dot4 fluid. I also used (here's the crux of the matter) stainless teflon coated shims to reduce squeel. BUT then things went wrong.
One of the shims was pushed forward enough so that a corner of it cut a 1mm deep groove around the axle part of the rotor (not the braking surface). I've repaired it tonight, but was wondering if I should get another rotor? The automotive instructor thought it would be OK, but I'm paranoid. I'm afraid that during hard braking around a corner, the rotor will split and leave me in a compromising position.
So..should I replace it or not? If so, should I do both??
WARNING: BE SURE THAT THE SHIMS ARE NOT PUSHED FORWARD ENOUGH TO RUB ON THE AXLE OF THE ROTOR.
Gracias,
el Raidman






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Front Brake Problem...and a WARNING!! [700][1989]
posted by  raidman  on Mon Mar 1 15:30 CST 2004 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.